Best Time To Buy A Table Saw of June: Reviews & Buyers Guide

This five piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.

Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.

The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process

Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again.

The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.

10" Compound Miter Saw

MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM

LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability

MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility

BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts

LARGE TABLE: Offers better material support with vice clamping system to secure work piece

THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments

HORIZONTAL HANDLE: For a secure hold

WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty

Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch

Adjustable rip fence with miter gauge for accurate straight and miter cuts

Blade cooling water reservoir to keep blade cool while minimizing dust and debris

Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry

Cross cut capacity: 7.75-inch; Diagonal cut capacity: 7.25-inch

Your purchase includes one Dewalt table saw, 10inch 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual

Other Specs: Max rip to left of blade – 22inch | Max rip to right of blade – 32-1/2inch | Max width of Dado – 13/16inch | Arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM

Rolling stand designed for easy set up and breakdown with excellent stability

Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate

Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods

Portability: Compact size for ease of transportation and storage

Easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate

Variety of cuts: 24.5 inches of rip capacity for ripping 4x8 plywood or OSB sheets

Power: 15 Amp, 5800 rpm motor

Onboard storage: Onboard storage provides easy access to the site pro guarding components and push stick when not in use

Guaranteed tough: Metal roll cage ensures job site durability

Turn your stationary tools into mobile machines, helping you to get the most out of your work space

Perfect for band saws, table saws, tool chests, cabinets, safes, planers, sanders, jointers, drill presses and more

Fits square base configurations anywhere from 11.8 by 11.8 inches up to 35.4 by 35.4 inches

Fits rectangular bases up to 51.2 by 19.7 inches in size

Features two fixed casters, two swivel casters, two foot-locking brakes, and a two-year warranty

Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.

The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.

Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it’s essentially just holding its spot once it is secured.

The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8” x 3/4” miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.

The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.

650 lb. capacity - it’s a true heavy duty adjustable universal mobile base

Ideal for large, unwieldy machines and tools - Table Saws, Band Saws, Planers, Jointers, Shapers, Spindle Sanders, and most other stationary power tools

Also perfect for larger cabinets, toolboxes, safes, gun cabinets, and much more

Foot operated steel locking levers with 3 inch non-marring ball bearing wheels and casters

Glides effortlessly, and locks down rock solid with a quick press

Low profile, only increasing machine height one inch

Adjusts in one inch increments - 12 x 12 inches to 36 x 36 inches square, or up to a 20 x 52 inch rectangle

For items that need a larger footprint the K1218 accessory rail kit is available. The kit includes 2 x 18in rails and 2 x 12in rails with necessary hardware

【DURABLE AND POWERFUL MOTOR】: Featured with a 4 Amps copper motor, the compact circular saw can reach a high cutting speed of 4500RPM to cut tile, wood, plastics, plaster board, PVC with ease. Heavy gauge iron wraparound base and aluminum upper cover adds extra durability and safety.

【3 BLADES AND COMPACT】: Comes with 1x30T HW for wood cuts/ 1x36T HS for metal cuts/ 1pcs grit diamond blade for tile cuts, small size and weight also make it a good addition to your toolkit, great for DIY projects around the house and your workshop. (1"for Wood; 3/8"for Tile; 3/16"for Aluminum)

【PRECISE AND ADJUSTABLE CUTTING DEPTH】: With the laser guide, the mini circular saw keeps the cutting on a straight line. Also the parallel guide attachment allows you to make a precise and quick cut with ease. Easy-set depth gauge lever for adjustable cutting depth from 0-25mm(1’’). Laser Level: Class 2.

【ERGNOMIC AND SAFE】: The soft rubber handle reduces hand fatigue effectively. Also with a dust port and the saw dust pipe, you can connect it to your vacuum to maintain a clean working environment. The double protection switch enhances safety in use.

【PACKAGE CONTENTS】 1 * Compact Circular Saw; 1 * 30T Saw Blade; 1 * 36T Saw Blade; 1 * Diamond Blade; 1 * Hex Wrench; 1 * Scale Ruler; 1* Dust Exhaust Pipe；2 * Cells for Laser Guide; 1 * User Manual.

5 piece height measuring devices of different sizes and 2 piece hole gauges, can easily set the height of the fence, blades bits and other cutters according to the needs, which is faster and more accurate than using a combined ruler.

Stack setup bars for a wide variation or sizes, or use on their own, work and measure quickly.

Set up gauge blocks are all 2-1/2 inches long, diameter of 2 pcs round block hole gauges respectively: 1/2" and 12mm, 5 pcs square block respectively: 1/2", 3/8", 1/4", 3/16", 1/8". Accuracy: ±0.03mm (less than 2 mils=less than 0.05mm)

Easy-to-read laser etched labels on each block. Fitted case included, so it will be more tightly protected during transportation.

7 pcs Blocks Solid Aluminum Construction Black Anodized to better protect router bits and saws.